Lynx Studio Hilo Reference Converter Thunderbolt – Silver

Lynx Studio Hilo Reference Converter Thunderbolt – Silver

Giá:

65.000.000

Cho phép đặt hàng trước

Bảo hành: 12 Tháng
Hãng sản xuất: Lynx Studio
Cam kết chính hiệu bởi SmartBuy
Hoàn tiền
111%
nếu giả
Mở hộp
kiểm tra
nhận hàng
Đổi trả trong
7 ngày
nếu sp lỗi

Thông số kỹ thuật

  • A/D Converters: 2 x channels, 24-bit
  • D/A Converters: 6 x channels, 24-bit
  • Sample Rates:All standard rates up to 192 kHz using SynchcroLock sample clock generator
  • Line Input L/R: Connectors: 2 x XLR, female
    THD+N: -114 dB at 1 kHz, -1 dBFS, 20 kHz filter, +22 dBu trim
    Dynamic Range: 121 dBA, -60 dBFS signal method
    Frequency Response: ± 0.01 dB, 20 Hz to 20 kHz
    Crosstalk: 140 dB maximum at 1 kHz, -1 dBFS signal
    Full-Scale Trim Settings: + 0 dBV, +2 dBV, +4 dBV, +6 dBV, +18 dBu, +20 dBu, +22 dBu, +24 dBu
  • Line Output L/R: Connectors: 2 x XLR, male
    Volume control with 0.5 dB increments
    THD+N: -109 dB at 1 kHz, -1 dBFS, 20 kHz filter, +22 dbu trim
    Dynamic Range: 121 dBA, -60 dBFS signal method
    Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
    Crosstalk: -135 dB maximum at 1 kHz, -1 dBFS signal
    Full-Scale Trim Settings: + 0 dBV, +2 dBV, +4 dBV, +6 dBV, +18 dBu, +20 dBu, +22 dBu, +24 dBu
  • Monitor Output: Connectors: 2 x male XLR
    THD+N: -107 dB at 1 kHz, -1 dBFS, 20 kHz filter, volume at maximum
    Dynamic Range: 121 dBA, -60 dBFS signal method
    Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
    Crosstalk: -135 dB maximum at 1 kHz, -1 dBFS signal
    Output Level at Maximum Volume: +24 dBu or +10 dBu, jumper-selectable
  • Headphone Output: Connectors: 1 x 1/4″ jack, front panel
    Volume control with 0.5 dB increments
    THD+N: -107 dB at 1 kHz, -1 dBFS, 20 kHz filter, volume at maximum
    Dynamic Range: 121 dBA, -60 dBFS signal method
    Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
    Crosstalk: -130 dB maximum at 1 kHz, -1 dBFS signal
    Output Level at Maximum Volume: +19 dBu
  • Digital I/O: AES/EBU I/O: transformer-coupled, on XLR connectors
    Coaxial S/PDIF I/O: transformer-coupled on RCA jacks
    Optical S/PDIF I/O Optical: on optical connectors
    ADAT I/O: 8 x channels at 48 kHz, when selected on optical connectors
    Dual Thunderbolt ports
  • Synchronization Options: Internal
    External word clock I/O, 75 Ohms TTL signal on BNC connectors
    AES/EBU or S/PDIF inputs
  • LCD Display: 480 x 282, touchscreen
  • Power Requirements: AC Power: 110-230 VAC, 30 W
    Battery Power: 9-18 VDC, on 4-pin XLRV
  • System Requirements:
    • Windows
      Intel Core 2 at 1.6 GHz, or AMD equivalent
      PC or laptop manufactured after January 2006
      1 GB RAM
      One functional USB 2.0 port
      Windows XP with SP3 (32-bit only), Vista with SP2, Windows 7, 8, 10
      Windows 32-/64-bit drivers provided by Lynx
    • Mac OS X
      Intel processor
      OS X 10.6.4 or higher
      1 GB RAM
      One functional USB 2.0 port
      Macintosh OS X drivers provided by Apple
    • iOS
      For iPad 7 or higher (excludes original iPad)
      Apple iPad 2 or newer
      iPad camera kit for USB connection
  • Dimensions: 8.5 x 10 x 3.25″ / 216 x 254 x 83 mm
    Half-rack, 2 RU
  • Weight: 6.75 lb / 3.1 kg

Packaging Info

Package Weight:10.35 lb

Box Dimensions (LxWxH): 15.2 x 12.6 x 5.8

 

The Hilo Reference A/D D/A Converter System from Lynx Studio Technology offers two channels of mastering-quality 24-bit/192 kHz analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world-class independent headphone amplifier, in a compact, half-rack size. Lightweight (at 6.75 lb) and portable, it provides audio professionals and audiophiles alike with pristine, open, and transparent audio quality, whether working in the studio, in the field, or as part of a home theater setup.

Lynx-Studio-Hilo-Reference-Converter-Thunderbolt---Silver-02

Hilo comes with a preinstalled LT-TB Thunderbolt interface card and offers a multitude of flexible digital I/O options. These include stereo AES/EBU, stereo coaxial S/PDIF, stereo optical S/PDIF (switchable to 8-channel ADAT lightpipe), and 16 channels of Thunderbolt communication to a host computer. Any digital input can be routed to any analog or digital output, and all digital outputs can have unique combinations of source inputs via the onboard 32-channel digital mixer.

Lynx-Studio-Hilo-Reference-Converter-Thunderbolt---Silver-01

The unit’s front panel is elegant in its simplicity and features a color LCD touchscreen display which allows you to quickly and intuitively set parameters for basic settings, routing functions, clocking, level settings, and more. It also offers a variety of accurate metering and measurement tools such as bar-graph metering of all inputs/outputs, old-style VU meters, and a 30-band Real Time Spectrum Analyzer (RTA) screen.

Lynx-Studio-Hilo-Reference-Converter-Thunderbolt---Silver-03

Hilo can operate as a standalone converter/mixer, and can be powered by standard 110-230 VAC power or remotely with 9-18 VDC, using standard video battery packs or car cigarette-lighter outlets.

  • Full-featured, state-of-the-art A/D D/A reference converter
  • Supports two channels of mastering-quality A/D conversion at up to 24-bit/192 kHz, and six channels of D/A conversion
  • Preinstalled LT-TB Thunderbolt interface
  • Redesigned analog stages and converter topology lower distortion and noise while maintaining transparency for A/D and D/A conversion
  • SynchroLock word clock for stable word clock and maximum jitter rejection
  • 12 total inputs, 16 total outputs, plus 32 channels possible via LSlot port
  • 2 x balanced analog line inputs with 8 trim level settings
  • Flexible digital I/O section offers stereo AES/EBU, stereo coaxial S/PDIF, stereo optical S/PDIF (switchable to 8-channel ADAT lightpipe), and 16 channels of Thunderbolt communication to a host computer
  • Line out, monitor out, and headphone output have their own dedicated D/A converters and independent input/routing selection
  • Color LCD display with backlit touchscreen, bar graph metering of all inputs/outputs, large VU-style meters – allows setting of all sample rates, sync settings, signal routing, meter options, future functions
  • Stereo 30-band Real Time Spectrum Analyzer (RTA) screen
  • Onboard, low-latency 32-channel digital mixer lets you route and combine any input to any output
  • Sample rate conversion
  • DSD playback
  • LSlot expansion bay allows for a wide array of current connectivity options to include USB 2.0, Thunderbolt, Dante, and future formats
  • Can operate with no expansion card installed, as a strictly standalone AD/DA converter / format converter / router / sample rate converter, and more
  • Dual power option, 110-230 VAC or 9-18 VDC via battery pack / car outlet
  • Updatable FPGA technology allows addition of future features
  • English, Spanish, French, and German menu sets
  • Lightweight, portable design – half-rack, 2 RU
  • Made in the USA
Đánh giá Lynx Studio Hilo Reference Converter Thunderbolt – Silver
Chưa có
đánh giá nào
5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá Lynx Studio Hilo Reference Converter Thunderbolt – Silver
Gửi ảnh thực tế
0 ký tự (Tối thiểu 10)
    +

     

    Chưa có đánh giá nào.

    Hỏi đáp

    Không có bình luận nào

    Thông số kỹ thuật

    • A/D Converters: 2 x channels, 24-bit
    • D/A Converters: 6 x channels, 24-bit
    • Sample Rates:All standard rates up to 192 kHz using SynchcroLock sample clock generator
    • Line Input L/R: Connectors: 2 x XLR, female
      THD+N: -114 dB at 1 kHz, -1 dBFS, 20 kHz filter, +22 dBu trim
      Dynamic Range: 121 dBA, -60 dBFS signal method
      Frequency Response: ± 0.01 dB, 20 Hz to 20 kHz
      Crosstalk: 140 dB maximum at 1 kHz, -1 dBFS signal
      Full-Scale Trim Settings: + 0 dBV, +2 dBV, +4 dBV, +6 dBV, +18 dBu, +20 dBu, +22 dBu, +24 dBu
    • Line Output L/R: Connectors: 2 x XLR, male
      Volume control with 0.5 dB increments
      THD+N: -109 dB at 1 kHz, -1 dBFS, 20 kHz filter, +22 dbu trim
      Dynamic Range: 121 dBA, -60 dBFS signal method
      Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
      Crosstalk: -135 dB maximum at 1 kHz, -1 dBFS signal
      Full-Scale Trim Settings: + 0 dBV, +2 dBV, +4 dBV, +6 dBV, +18 dBu, +20 dBu, +22 dBu, +24 dBu
    • Monitor Output: Connectors: 2 x male XLR
      THD+N: -107 dB at 1 kHz, -1 dBFS, 20 kHz filter, volume at maximum
      Dynamic Range: 121 dBA, -60 dBFS signal method
      Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
      Crosstalk: -135 dB maximum at 1 kHz, -1 dBFS signal
      Output Level at Maximum Volume: +24 dBu or +10 dBu, jumper-selectable
    • Headphone Output: Connectors: 1 x 1/4″ jack, front panel
      Volume control with 0.5 dB increments
      THD+N: -107 dB at 1 kHz, -1 dBFS, 20 kHz filter, volume at maximum
      Dynamic Range: 121 dBA, -60 dBFS signal method
      Frequency Response: ± 0.02 dB, 20 Hz to 20 kHz
      Crosstalk: -130 dB maximum at 1 kHz, -1 dBFS signal
      Output Level at Maximum Volume: +19 dBu
    • Digital I/O: AES/EBU I/O: transformer-coupled, on XLR connectors
      Coaxial S/PDIF I/O: transformer-coupled on RCA jacks
      Optical S/PDIF I/O Optical: on optical connectors
      ADAT I/O: 8 x channels at 48 kHz, when selected on optical connectors
      Dual Thunderbolt ports
    • Synchronization Options: Internal
      External word clock I/O, 75 Ohms TTL signal on BNC connectors
      AES/EBU or S/PDIF inputs
    • LCD Display: 480 x 282, touchscreen
    • Power Requirements: AC Power: 110-230 VAC, 30 W
      Battery Power: 9-18 VDC, on 4-pin XLRV
    • System Requirements:
      • Windows
        Intel Core 2 at 1.6 GHz, or AMD equivalent
        PC or laptop manufactured after January 2006
        1 GB RAM
        One functional USB 2.0 port
        Windows XP with SP3 (32-bit only), Vista with SP2, Windows 7, 8, 10
        Windows 32-/64-bit drivers provided by Lynx
      • Mac OS X
        Intel processor
        OS X 10.6.4 or higher
        1 GB RAM
        One functional USB 2.0 port
        Macintosh OS X drivers provided by Apple
      • iOS
        For iPad 7 or higher (excludes original iPad)
        Apple iPad 2 or newer
        iPad camera kit for USB connection
    • Dimensions: 8.5 x 10 x 3.25″ / 216 x 254 x 83 mm
      Half-rack, 2 RU
    • Weight: 6.75 lb / 3.1 kg

    Packaging Info

    Package Weight:10.35 lb

    Box Dimensions (LxWxH): 15.2 x 12.6 x 5.8